November 22, 2010

Daft Punk, Part 4: Helmet Updates and Fabric Discussion

There isn’t much to report as far as Thomas’ helmet goes since it’s already mostly sculpted, except for two minor things. The first thing is that I’m having the entire ear lathed by a friend in Tennessee. The entire ear is simply a profile revolved around an axis, so it can be lathed. I’d rather hand that detail off to an experienced lather than try to sculpt it freehand twice and expect above par results. The second thing is that I’ve recessed the visor area on the face. I wanted to have the visor sculpted into the helmet so that there would be no question as to where to cut for the visor hole. So I cut the visor out and replaced it with some “For Sale” sign plastic and smoothed it out.

S7000397

S7000407

Following in Volpin’s footsteps, I had a local trophy shop (Redstone Recognitions) laser engrave the details on Guy’s ear plates. It really is the best option for this if you want exact mirror images of the details. Not being able to find adequate visual references for that particular part of the helmet, I used Volpin’s ear plates as reference. I drew out the design in Adobe Illustrator and sent in the vector file. For $10 I had him laser engrave two copies of the file on a piece of MDF. The engraving is shallow, but super crisp – and more than enough depth for molding. However, some scaling issues arose between the file transfer. I was using Adobe Illustrator, and he was using Corel Draw. The file should have engraved at exact scale, but it ended up being about ¼” shorter, about 10% smaller overall. For $10, I could have him do another, larger copy of the file to compensate for the scaling issues, but I may be able to work with what I have. I won’t be able to tell until I cut out the existing detail-less ear panel and mock up the engraved pieces in place.

S7000412

I started sculpting Guy Manuel’s helmet this weekend. Beginning early Saturday morning, I started layering on thin layers of Bondo. I haven’t ever really used the bondo spatulas before, so I figured I’d give it a try. For simple shapes like this, it works wonders. For trickier areas I still prefer applying bondo with my finger. But with the spatula, I was able to apply an even coat over all the surfaces, and I haven’t really found any major shape issues that need to be addressed. Because I had about 4 layers of bondo on the visor, I was able to spend about an hour shaping it with my palm sander, and it was pretty much ready for smoothing.

The rest went super quickly. By the end of Sunday, I had all the surfaces with bondo on them, and I’ve even begun smoothing them out with glazing putty. As of right now, the frame has one good pass with glazing putty on it, and it only needs minor touchups. During the week I hope to start smoothing out the visor and back recessed areas, as well as starting to apply the seam line detail above the ears. Guy’s Tron helmet also has a cap over the normally exposed wired area, so I have to sculpt that detail in as well.

S7000418

S7000442

S7000447

In other Daft Punk project news, I recently picked up some fabric for the jackets and pants. I know I didn’t pick up enough to make both jackets and both pairs of pants, but I have enough for one full outfit and either another jacket or another pair of pants. Judging by the hi-res version of the Tron image in the previous post, I’ve determined that the best available material I can get locally is white fleece-backed vinyl. The fleece-backed stuff has more give to it than the marine-quality stuff (which is usually used for upholstery), and it folds just like the material in the photo. The material in the photo doesn’t appear to be very stiff leather at all, so I figure what I got is one of the best analogs I could find.

One problem I’ll have to face is the perforation in certain sections of the material. Certain panels on the jackets and pants have a fine grid of holes throughout. Those holes appear to be spaced by about a ¼”, so that means a LOT holes. I have two ideas of how to go about achieving the look. I intend to cut a 6” by 6” swatch of material and apply the grid of dots to it with a fine point sharpie. If the dots look like holes at close-enough of a distance, then I’ll have a feasible option. Another swatch will be cut and then I’ll probably apply the same grid with something that can punch the holes at that size. I haven’t figured this one out yet (as I don’t work with fabric often), so any ideas you can pitch will be considered. A third option that I might consider (and it would require outsourcing to someone with the equipment) would be to have the pattern screen printed onto the vinyl. It would have to pass the same test as the sharpie method, but it would go a LOT faster. I have several people in mind for this, so it definitely is a feasible option at this point.

No photos to show of the fabric part yet, as it's just a big lump of white vinyl right now. However, here are more photos of the helmets for your viewing pleasure:

http://www.flickr.com/photos/2storyprops/sets/72157624728828103/

11 comments:

  1. Could I purchase you Pepakura files?
    Please??

    ReplyDelete
  2. Hey Thomas. Sorry, but I won't be sending these files out to people I don't know. I've had some file infringement issues recently, and I'm in total lock-down mode with my files. I will be molding these, so I can make castings if you're willing to wait a bit and buy one of those.

    ReplyDelete
  3. The perforated material is leather that is usually made into motorcycle wear. There's a company called ponoko that can precision cut different materials and you might be able to ask them if they could laser cut the perfs at a nominal fee.

    ReplyDelete
  4. Or you might check this out. http://www.kingrichardco.com/VinylHeadliner.htm
    scroll down and they have white perfed vinyl!

    ReplyDelete
  5. @ Valley Spinners and Weavers

    Thanks for the tip! I checked out that website, and it's definitely a good find. It's pretty pricey, though, at $30 a yard. But it's definitely the right pattern and size. I've estimated it out to be a 1/4" perforated grid, and that's what they sell. It's foam-backed, though, and the material on the jackets looks to bend, flex, and crinkle more like flannel-backed vinyl.

    I spoke with a local screen printer I know about printing on the hole pattern as an option, and we basically worked it out so that all I'd have to do is buy him dinner one night and I could come over and screen the panels myself.

    However, your first comment has given me another idea. You mentioned that they ponoko could laser cut the pattern. Since I had the detail inserts for Guy's helmet laser engraved, I wonder if the same trophy shop could laser engrave on vinyl? I'm thinking out loud here, but if it can laser cut into wood, surely it could cut this vinyl. I'd be a little worried about it burning the material and leaving scorch marks, but he's got a transfer tape that he covers the piece in that's supposed to burn instead of the material.. Hmmm..

    ReplyDelete
  6. Just checked with my laser engraver, and he did some research into it. With his equipment, laser engraving the vinyl would produce toxic fumes and would damage the laser.

    Screen printing it is still probably my most cost effective method of getting the right look. After all, it only needs to look like holes from a few feet away. ;)

    ReplyDelete
  7. Hey David, just saw your project, great to see how much ambition you're putting into this, can't wait to see the finished product. Hope to one day be able to something similar, don't have the tools or the means at the moment :)

    ReplyDelete
  8. If your determined and have a fair amout of spare time on your hands you could allways puch out all the holes by hand using a leather or hand sewing punch.

    ReplyDelete
  9. Hi Mr. Reimer,

    I was wondering, at my school we have a cure for cancer dance comming up in march that currently does not have many people showing up. I was attempting to make a few helmets from various dj's, such as deadmau5 who i already made, and my next two were the daft punk duo. In order to raise support and get more people to come for this event to raise money for the four diamonds foundation, i wanted to ask you if i could have your files to only make one of each helmet. I understand that you do not want them distributed, so you already have my name, and my email adress is TyStorr@gmail.com, so i can promise you i will not distribute them. If you do (and you won't) see these files back online, you have my name and you can sue me or something? If you could please consider this, and reply back to my email. Thanks!!!

    ReplyDelete
  10. Hey David,
    I would like to start by saying how awesome your work is and that you've inspired myself and many others to get into prop making. I've been following your blog for a while and I'm noticing that there haven't been any updates on the Daft Punk projects and I was wondering if we would be seeing any updates soon. Also, in a previous comment, you stated that later in the project you would be selling castings of the helmets. I was curious to see if you are still planning on selling them and If I could obtain a couple at some point. Again, keep up the amazing work and I look forward to seeing more of the project. Thanks!!

    ReplyDelete
  11. Good to hear you're planning to offer the helmets. It would be a shame to deny the world of this awesomeness. That being said, I'm dying to get my hands on a Guy-Man helmet.

    ReplyDelete